What is the common fault treatment and use method of cage stranding machine?

Release time:

2023-03-03

The cage machine is a very good product with many unique advantages and properties. The mechanical properties and electrical insulation properties of cage steel strand products are very good, and its stability has good water resistance. Oil resistance. At the same time, its processing is easy to shape. So what is the common fault treatment and use method of cage stranding machine?

What is the common fault treatment and use method of cage stranding machine?

In order to better increase the development of cable technology, it is necessary to continuously improve the formula and performance, effectively improve the heat resistance and voltage level of the cable, better improve the cold resistance and aging resistance of the cable material, and better extend the service life of the cable. In addition, the polymer material of the product is synthetic material, which is very excellent. Therefore, the product has more advantages and performance in the application process, and has been recognized and praised by many people. This product can better meet the needs of processing, preservation and use, is a good product.

2. Before using the cage machine, be equipped with a leak-proof device. Cage machine is a kind of electromechanical product with high efficiency and wide application, but many people don't know much about our products.

With the development of society, the application of mechanical products in many industries is particularly important. Usually used to install gas pipelines. Real estate equipment and electrical equipment. The standard design structure is particularly reasonable and easy to operate. It also facilitates the maintenance of personnel. It is a very safe product. Towels are suitable for connecting and disconnecting all kinds of water, electricity and trains. It is also automated.

4. Cage machine standardized installation, device and reliable clamping device. The machine adopts an advanced cooling and lubrication system, which can extend the service life of 100 years, prevent the catheter from deforming and sliding, and obtain high-quality taper threads. Therefore, the cage rack has been widely used in the equipment installation engineering industry, which improves work efficiency, speeds up the progress of the project, and reduces labor intensity. But please note that the product should be reliably grounded to prevent leakage and avoid damage to the contact machine.

What are the main features of the cage stranding machine?

1. With seamless steel pipe as the main shaft, two rolling bearings are supported front and rear.

Through a set of gears on the reversing shaft, the full twist button function of the middle roller can be realized. It avoids the adverse factors that affect the increase of ascent speed, such as the jump of the spiral roller tube and the accumulation of gear clearance caused by the spiral guide tube.

3. Use the tension and electromagnetic pad provided by the steel wire roller to adjust the tension. At the same time, PLC control can maintain the core wire tension of each steel wire roller to improve the formula, and the frame is easy to disassemble.

4. The existing high-speed stranded wire not only has the characteristics of high speed, low noise, simple operation, perfect detection and alarm system, but also has more round product quality and more stable lay distance. No matter how good the equipment is, it will inevitably fail. Due to the increase in the output of the twister, various failures have occurred. Briefly describe several common faults of high-speed twisting machines: jam, disconnection, spikes and noise. First, the tension is uneven, tight, loose, and the tight iron core passes, resulting in back strands. Second, the mold is too large to properly adjust the tension.

5. The distance is large, the mold position is not suitable, the twisting angle is unreasonable, and the single twisting machine is composed of 19 or more strands. Because the direction of the stock line is not bad, it can only be twisted with the same partner, so the combination of the core line is irregular. Currently, manufacturers use dual-pitch stranding systems. Therefore, strands above 19 strands are more serious than twisting machines.

What is the exclusion method of cage stranding machine?

1. It is to improve the steel strand and steel wire device,

2. It adopts advanced single thread tension regulator, so that each single thread tension can be adjusted and controlled.

3. The products of the roller can reach the steel wire strand of the aquatic product.

4. Can meet the requirements of the mold recycling method.

5. Adjust the thread ratio appropriately.

TAG：

Cable Machinery

The steel wire rope equipment conveyor belt has the following characteristics compared with other types of conveyor belts

What are the standards for the use of cage stranding machines in all aspects

The steel wire rope equipment conveyor belt has the following characteristics compared with other types of conveyor belts

What are the standards for the use of cage stranding machines in all aspects