Operation and precautions of cable forming machine
Release time:
2021-05-18
The cable forming machine is a kind of wire and cable equipment used for cable forming and armored of various cross-sections of multi-core rubber cables, plastic cables, cross-linked cables, telephone cables and control cables. According to the different speed, it can be generally divided into two types: cage cable forming machine and high-speed cage cable forming machine. Among them, the high-speed cage cable forming machine is used for the stranding of copper core aluminum stranded wire and bare aluminum wire. It can also be used for forming plastic cables, rubber sheathed cables and other products. The following small series mainly introduces the operation and precautions of the cable machine.
Cable-forming machineIt is a wire and cable equipment for cable molding and armor of various cross sections of multi-core rubber cables, plastic cables, cross-linked cables, telephone cables and control cables. According to the different speed, it can be generally divided into two types: cage cable forming machine and high-speed cage cable forming machine. Among them, the high-speed cage cable forming machine is used for the stranding of copper core aluminum stranded wire and bare aluminum wire. It can also be used for forming plastic cables, rubber sheathed cables and other products. The following small series mainly introduces the operation and precautions of the cable machine:
1.Cable-forming machinePreparation before start-up
(1) The operator first checks the lubrication of all rotating parts of the machine, whether the position of the shift handle is in place, whether all parts of the machine are normal, whether the twisting cage is flexible, whether the twist lock has been placed, correctly check whether the base bolts are tightened, and Whether all safety devices are in good condition. After checking correctly, please run at low speed first.
(2) According to the product process requirements, prepare before forming the cable, lift the cable core that needs to be twisted to the frame, and then choose to use twisted or non-twisted twisted to remove the core wire from the spool. The front end of the branch reel is passed through the wire mold base after the manual twisting head, and the cable head is led out using the traction cable. At this time, please start the cable machine to run slowly so that the outgoing cable has sufficient length and is located on the traction sheave. After winding several times, please restart the machine. After a certain period of operation, the twisted cable can be wound onto the spool.
2. Work of lifting reel and brake
Place the winch cage frame on the top of the upper layer, tighten the brake, open the bearing bushing, use a crane to lift the wire reel into the frame, close the bearing bushing, tighten the bolts, loosen the brake, and then adjust the lifted wire reel to the bottom. Tighten the brake and lift the other spools as described above.
3. Precautions
Non-production personnel away from the site, startCable-forming machineAfter that, no one is allowed to enter the restricted area to replace the spool. Turn off the switch and replace the spool to prevent electrical failure. After the production is completed, turn off the power first, and then leave the site for maintenance. After power on, wait for the car to stop before entering the site. Do not repair it during the production process. During the repair period, a special person should take care of the electrical part or lock the switch box to prevent accidents.
TAG：
Previous Page:
Recommend News
HEXING CABLE MACHINERY
TEL: +86-317-3601666, +86-317-3236119
FAX: +86-317-3618408
E-MAIL: china@hbhxdg.cn
E-MAIL: hbhxdg@gmail.com
WEB: http://www.hbhxdg.cn
ADD: Baoantun Industrial Zone, Hejian City, Hebei Province