Safe operation method of steel belt armored machine
Release time:
2021-03-23
Nowadays, with the development of science and technology, in order to better carry out production and construction, more and more large-scale equipment About Us life. At the same time, there are many people who want to master the technology of operating these machines, so as to glow in this position, but if you want to be a professional operator, do you know these safe operation methods of steel belt armored machines? Before starting the steel belt armored machine, as a professional operator, the first thing is to check whether the protective cover of each part of the equipment and the cover plate of its trench are firm. If it is not firm, it must be handled in time, otherwise it may cause some safety if it is directly opened.
Nowadays, with the development of science and technology, in order to better carry out production and construction, more and more large-scale equipment About Us life. At the same time, there are many people who want to master the technology of operating these machines, so as to glow in this position, but if you want to be a professional operator, do you know these safe operation methods of steel belt armored machines?
Before starting the steel belt armored machine, as a professional operator, the first thing to do is to check whether the protective cover of each part of the equipment and the cover plate of its trench are firm. If it is not firm, it must be handled in time, otherwise it may cause some potential safety hazards if it is directly opened. At the same time, it is also necessary to carefully check whether some parts used for high-speed rotation at work have been fastened, and the steel belt armored machine can only be started if it is safe. When starting the machine to work, the staff must wear a full set of protective equipment, and the corners of the clothes cannot float out, otherwise the operation will be affected when working. The most important thing is that the fixing screws of the steel belt plate on the steel belt armoring machine need to be in a complete state. If they are aged, they should be replaced in time. If they are not screwed properly, it is not allowed to start the steel belt armoring machine.
At work, the operator needs to wear protective glasses. In the process of welding steel strips with seam welding machines, copper wires must not be used to replace fuses for work, because the resistances of these two materials are different. If they cannot be timely Play a protective role, it may burn out the circuit and cause property losses. During the operation of the machine, the equipment cannot be lubricated, or repaired and cleaned, and at the same time, it cannot be cleaned nearby, so that dust enters the steel belt armor machine, affecting its work efficiency, and even malfunctions. After the steel belt armoring machine finishes dividing the line, the cable cannot be broken first, especially the brute force cannot be used to break it. In the process of production, no sundries can be placed in the pedestrian passage, and the raw materials to be used in production must be neatly arranged, so that the production process can be neat and orderly.
Finally, before driving, be sure to check whether the wire rope on the electric hoist is complete and correct. In the process of starting, you can not use the suspended steel belt. If the machine breaks down, you must seek professional help and are not allowed to do it without permission.
TAG：
Previous Page:
Next page:
Recommend News
HEXING CABLE MACHINERY
TEL: +86-317-3601666, +86-317-3236119
FAX: +86-317-3618408
E-MAIL: china@hbhxdg.cn
E-MAIL: hbhxdg@gmail.com
WEB: http://www.hbhxdg.cn
ADD: Baoantun Industrial Zone, Hejian City, Hebei Province